File number： HSP-1 Date of production： 3.2017
Product name:Plastic colored particles (polypropylene foam particles)
<Ingredient description>
Main components and content of the product
Ingredients: resin pigment
Chemical Name: Polypropylene Organic Pigment
Content: 90% or more 10% or less
Chemical formula: [CH2-CH(CH3)]n
CAS No 9010-79-1
<Poison level>
Grade : Non-toxic
<Emergency disposal method>
Particles enter the eye: Wash your eyes with water, if you still feel residue in your eyes,
Please go to the ophthalmologist for a consultation.
Skin adsorption particles: If the surface of the skin adsorbs particles or powder, rinse with water.
Inadvertently inhaled into the throat: Try to cough up the particles. If you can't get out of the cough and feel uncomfortable to vomit, please go to the doctor.
<Extinguishing>
Extinguishing method If the ventilation and ventilation facilities are damaged, you can use ordinary fire extinguishing methods. Since synthetic materials tend to burn insufficiently, resulting in thermal decomposition and generation of a large amount of toxic gases, ventilation and ventilation equipment can effectively prevent the rapid accumulation of toxic gases in the room.
Extinguishing substances: Large capacity water, dry powder, foam, carbon dioxide.
<Particle diffusion disposal method>
Cleaning, collecting or destroying
Dispersed particles or powders can cause the ground to slip and clean the ground in time. Otherwise, the particles may enter the sewer, block the sewer, or drain down the sewer. The diffusion of synthetic particles may be Seriously endangering birds, aquatic organisms and the natural environment, all scattered particles on the ground must be removed as soon as possible.
<Storage and storage>
Method :Stored at room temperature, the foamed particles do not produce water vapor;
Be careful to stay away from open flames;
Always organize the storage area to ensure that there is enough space for storage.
Custody: Avoid direct sunlight, water spray and temperature increase;
Fireworks are strictly prohibited in and around the warehouse.
<Physical/Chemical Properties>
Appearance: White or colored foam particles
Melting point: 130-150 °C
Specific gravity: 10~200 g/l
Solubility: Insoluble in water, hardly soluble in organic solvents at room temperature, but soluble in organic solvents under high temperature heating conditions, and the solvent temperature should be above the melting point of polypropylene.
<Chemical activity>
Flammability: flame retardant
Flash point: above 340 ° C
Flash point: above 490 °C
Chemical reactivity in water: no reaction
Oxidizing: non-oxidizing
Stability / Activity: The material is stable under normal storage conditions and is not active.
<Poison reminder>
Not toxic to humans;
The thermal decomposition of this material produces toxic gases and must be taken care of.
<Ecological Environmental Protection>
To protect birds, aquatic life and the natural environment, do not put waste particles into any waters.
<Disposal of waste materials>
In principle, incineration or landfill can be used to treat waste materials.
If choose the incineration method, you must abide by the "Air Pollution Control Law".
If choose the landfill method, you must abide by the "Solid Waste Pollution Prevention and Control Law."
<Transport Notes>
Do not let the packaging (soft packaging) get wet by the rain;
Be careful not to scratch the bag during transportation. In case the bag is broken, the foaming particles are scattered on the ground. Be careful not to slip and clean the floor as soon as possible.
<Related laws>
Fire protection method No flammable substance in the range of 20 cubic meters around synthetic resin
<This description rights>
This note is based on current materials and information and may be revised in the future based on new content.
The above descriptions are only general treatment methods, and those that require special treatment must follow the relevant treatment methods.
This description is for reference only and is not intended as any report.
File number： HSP-1 Date of production： 3.2017
Product name:Plastic colored particles (polypropylene foam particles)
<Ingredient description>
Main components and content of the product
Ingredients: resin pigment
Chemical Name: Polypropylene Organic Pigment
Content: 90% or more 10% or less
Chemical formula: [CH2-CH(CH3)]n
CAS No 9010-79-1
<Poison level>
Grade : Non-toxic
<Emergency disposal method>
Particles enter the eye: Wash your eyes with water, if you still feel residue in your eyes,
Please go to the ophthalmologist for a consultation.
Skin adsorption particles: If the surface of the skin adsorbs particles or powder, rinse with water.
Inadvertently inhaled into the throat: Try to cough up the particles. If you can't get out of the cough and feel uncomfortable to vomit, please go to the doctor.
<Extinguishing>
Extinguishing method If the ventilation and ventilation facilities are damaged, you can use ordinary fire extinguishing methods. Since synthetic materials tend to burn insufficiently, resulting in thermal decomposition and generation of a large amount of toxic gases, ventilation and ventilation equipment can effectively prevent the rapid accumulation of toxic gases in the room.
Extinguishing substances: Large capacity water, dry powder, foam, carbon dioxide.
<Particle diffusion disposal method>
Cleaning, collecting or destroying
Dispersed particles or powders can cause the ground to slip and clean the ground in time. Otherwise, the particles may enter the sewer, block the sewer, or drain down the sewer. The diffusion of synthetic particles may be Seriously endangering birds, aquatic organisms and the natural environment, all scattered particles on the ground must be removed as soon as possible.
<Storage and storage>
Method :Stored at room temperature, the foamed particles do not produce water vapor;
Be careful to stay away from open flames;
Always organize the storage area to ensure that there is enough space for storage.
Custody: Avoid direct sunlight, water spray and temperature increase;
Fireworks are strictly prohibited in and around the warehouse.
<Physical/Chemical Properties>
Appearance: White or colored foam particles
Melting point: 130-150 °C
Specific gravity: 10~200 g/l
Solubility: Insoluble in water, hardly soluble in organic solvents at room temperature, but soluble in organic solvents under high temperature heating conditions, and the solvent temperature should be above the melting point of polypropylene.
<Chemical activity>
Flammability: flame retardant
Flash point: above 340 ° C
Flash point: above 490 °C
Chemical reactivity in water: no reaction
Oxidizing: non-oxidizing
Stability / Activity: The material is stable under normal storage conditions and is not active.
<Poison reminder>
Not toxic to humans;
The thermal decomposition of this material produces toxic gases and must be taken care of.
<Ecological Environmental Protection>
To protect birds, aquatic life and the natural environment, do not put waste particles into any waters.
<Disposal of waste materials>
In principle, incineration or landfill can be used to treat waste materials.
If choose the incineration method, you must abide by the "Air Pollution Control Law".
If choose the landfill method, you must abide by the "Solid Waste Pollution Prevention and Control Law."
<Transport Notes>
Do not let the packaging (soft packaging) get wet by the rain;
Be careful not to scratch the bag during transportation. In case the bag is broken, the foaming particles are scattered on the ground. Be careful not to slip and clean the floor as soon as possible.
<Related laws>
Fire protection method No flammable substance in the range of 20 cubic meters around synthetic resin
<This description rights>
This note is based on current materials and information and may be revised in the future based on new content.
The above descriptions are only general treatment methods, and those that require special treatment must follow the relevant treatment methods.
This description is for reference only and is not intended as any report.
